The YG10 is a weather resistant vehicle and pedestrian gate lock. Able to be installed externally it can fitted horizontally or vertically (locking down) and is supplied with a matching strike plate. It is strong enough to prevent forced entry on all styles of gates and has integrated electronics that provide complete control over the lock and allow for connection to access control and alarm systems.

The YG10 is made to the highest specifications and includes the following features;

• Varied input voltage: 12 – 24VDC can be supplied to the lock
• Multiple locking / unlocking attempts to correct miss-aligned gates
• Selectable automatic locking when the gate closes
• Fail safe / Fail secure user selection with a single switch
• Door position monitoring
• Bolt locked and unlocked monitors
• 3000Kg holding force
• Weather resistant – IP65 rated

Although the YG10 offers an array of features, it is simple to install and operate. There is easy access to the mounting holes in the lock and strike while wiring the lock is made easy by screw terminals and a connection guide written on the lock itself. Small switches located on the locks printed circuit board offer the simplest of ways for a user to set the locks operation as desired. Multiple user outputs offer feedback and connection to alarm systems and an onboard beeper provides instant information about the locks state.
The YG10 is supplied with batteries that can be fitted to the lock if fail safe or fail secure operation in required. With batteries fitted, a switch located on the locks printed circuit board can be used to select fail safe or fail secure. In the event of a power failure the lock will either unlock (fail safe) or lock (fail secure).